hrefspace

 找回密码
 立即注册
搜索
热搜: PHP PS 程序设计
查看: 222|回复: 0

基础激励下6-UHP并联平台的动力学建模与仿真

[复制链接]

508

主题

508

帖子

1554

积分

大司空

Rank: 5Rank: 5

积分
1554
发表于 2023-9-25 17:55:41 | 显示全部楼层 |阅读模式
基础激励下6-UHP并联平台的动力学建模与仿真




基础激励下6-UHP并联平台的动力学建模与仿真.pdf(758.21 KB, 下载次数: 0)<div class="tip tip_4" id="attach_6253_menu" style="position: absolute; display: none" disautofocus="true"><div class="tip_c xs0">2017-8-31 23:46 上传
点击文件名下载附件



基础激励下6-UHP并联平台的动力学建模与仿真

王晓明1,2, 徐振邦1, 王兵1,2, 梁凯翔1,2, 吴清文1

1. 中国科学院长春光学精密机械与物理研究所空间机器人工程中心空间机器人系统创新研究室,吉林 长春 130033;
2. 中国科学院大学,北京 100049

Dynamic Modeling and Simulation of a 6-UHP Parallel Platform under Base Excitation

WANG Xiaoming1,2, XU Zhenbang1, WANG Bing1,2, LIANG Kaixiang1,2, WU Qingwen1

1. Innovation Lab of Space Robot System, Space Robotics Engineering Center, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, China;
2. University of Chinese Academy of Sciences, Beijing 100049, China

[table]
<div align="left">
[table]
[table]
全文:PDF (759 KB)   HTML (1 KB)  
输出:BibTeX | EndNote (RIS)
[/td][/tr][tr][td=1,1,773]摘要 面向隔振指向技术的研制需求,开展了基础激励下6-UHP(universal-Hooke-prismatic)并联平台的动力学建模与仿真研究.首先,介绍了6-UHP并联平台的结构特点;接着,利用Kane方法对并联平台进行理论建模,得到完整动力学方程;最后,利用联合仿真技术对并联平台的理论模型进行验证.结果表明,仿真得到的6维加速度曲线与输入加速度曲线吻合度良好,最大误差为5.40%,最小误差为0.25%,充分验证了动力学模型的准确性.[/td][td=1,6,217]
[/td][/tr][tr][td]关键词 并联平台,  精密指向,  Kane方法,  动力学建模,  联合仿真    [/td][/tr][tr][td]Abstract:Dynamic modeling and simulation of a 6-UHP (universal-Hooke-prismatic) parallel platform under base excitation are studied for the requirements of vibration isolation and precision pointing technology. Firstly, the structure characteristics of 6-UHP parallel platform are introduced. Then, the theoretical modeling based on Kane formulation is performed, and the complete dynamic equation of the parallel platform is derived. Finally, the theoretical model of the parallel platform is verified by co-simulation. The results indicate that the 6-dimensional acceleration curve obtained from simulation is similar to the input acceleration curve, the maximum relative error is 5.40%, and the minimum relative error is 0.25%. Thus, the accuracy of the dynamic model is fully verified.[/td][/tr][tr][td]Key wordsparallel platform           precision pointing           Kane formulation           dynamic modeling           co-simulation[/td][/tr][tr][td]收稿日期: 2016-09-01     [/td][/tr][tr][td]
1:

TH113.1
[/td][/tr][tr][td]基金资助:国家自然科学基金(11672290)[/td][/tr][tr][td]通讯作者: 徐振邦,xuzhenbang@gmail.com    E-mail:xuzhenbang@gmail.com[/td][/tr][tr][td]作者简介: 王晓明(1993-),女,博士生.研究领域:空间机器人动力学建模与分析.
徐振邦(1982-),男,博士,副研究员.研究领域:振动控制,空间遥感器的力学分析.
王兵(1989-),男,硕士生.研究领域:空间机器人结构设计.

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有帐号?立即注册

x
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

QQ|Archiver|手机版|小黑屋|hrefspace

GMT+8, 2024-5-15 20:01 , Processed in 0.067750 second(s), 22 queries .

Powered by hrefspace X3.4 Licensed

Copyright © 2022, hrefspace.

快速回复 返回顶部 返回列表